| DP 101 | Suction Casing | Ductile Iron |
| DP 102 | Intermediate Casing | Ductile Iron |
| DP 103 | Discharge Casing | Ductile Iron |
| DP 104 | Hydraulic Dampener Body (4x4) | Ductile Iron |
| DP 105 | Hydraulic Dampener Cap | Carbon Steel |
| DP 106 | Hydraulic Dampener Body (6x4) | Ductile Iron |
| DP 107 | Upper Suction Elbow | Ductile Iron |
| DP 108 | Lower Suction Elbow | Ductile Iron |
| DP 109 | End Pedestal | Ductile Iron |
| DP 110 | Center Pedestal | Ductile Iron |
| DP 111 | Hydraulic Dampener Tube | Carbon Steel |
| DP 112 | Discharge Drive Cam | Aluminum |
| DP 113 | Suction Drive Cam | Aluminum |
| DP 114 | Eccentric Cam Lobe | 420 Stainless Steel |
| DP 115 | Drive Shaft | 416 Stainless Steel |
| DP 116 | Roll Pins-Eccentrics To Shaft | Hardened Steel |
| DP 117 | Drive Cam Bearings | Ball Bearing (a) |
| DP 118 | Drive Shaft Bearings | Ball Bearing (b) |
| DP 119 | Suction Clack Valve | Neoprene (c) |
| DP 120 | Clack Valve Plate | 316 Stainless Steel |
| DP 121 | Suction Disk | Neoprene (d) |
| DP 122 | Suction Drive Cam Rod | 420 Stainless Steel |
| DP 123 | Discharge Disk | Neoprene (d) |
| DP 124 | Discharge Drive Cam Rod | 420 Stainless Steel |
| DP 125 | Suction Diaphragm | Neoprene (e) |
| DP 126 | Suction Diaphragm Retainer | CPVC |
| DP 127 | Discharge Diaphragm | Neoprene (e) |
| DP 128 | Discharge Diaphragm Retainer | CPVC |
| DP 129 | Gasket - Clack Valve | Mineral Composite |
| DP 130 | Gasket - Suction Casing | Mineral Composite |
| DP 131 | Gasket - Discharge Casing | Mineral Composite |
| DP 132 | Gasket - Suction Elbow | Mineral Composite |
| DP 133 | Gaskets - Hydraulic Dampeners | Red Rubber |
| DP 134 | Nuts, Bolts, Washers, Lockwashers | 304 Stainless Steel |
| DP 135 | Tie Rods - Hydraulic Dampeners | 304 Stainless Steel |
| DP 136 | Shroud - Pedestal and Drive Assembly | 304 Stainless Steel |
| DP 137 | Guard - Belt and Sheave | 304 Stainless Steel |
| DP 138 | Base - Pump And Motor Mounting | 304 Stainless Steel |
| DP 139 | Fittings - Hydraulic Dampener | Bronze (f) |
| DP 140 | Gauges - Hydraulic Dampener | Stainlees Steel (g) |
a) SKF Bearing
– Sealed And Greased For Life
b) AMI Bearing – Sealed And Greased For Life, Self-Aligning
c) Two-Ply Nylon Reinforced
d) 70 Durometer, Four-Ply Ballistic Nylon Reinforced With Aluminum Drive Insert
e) 70 Durometer, Two-Ply Ballistic Nylon Reinforced
f) Adapters, Ball Valves, And Air Nozzle
g) Glycerin Filled 4” Compound With 304 Stainless Steel Cover
* All Carbon Steel and Ductile Iron surfaces (inner and outer) are coated with DuPont TGIC Industrial Thermoplastic Powder Coat, 3 Mils
BlankButtons/LtBlank.jpg){kind=spacer}
BillOfMat/1)Ex-A.jpg){kind=small}
BlankButtons/CtrBlank.jpg){kind=spacer}
BillOfMat/2)Bill-A.jpg){kind=small}
BlankButtons/RtBlank.jpg){kind=spacer}
